Marble countertop identification method

  
  The quality of finished finished marble countertops can be identified from the following four aspects:
  One view, that is, to observe the surface structure of the stone with the naked eye. Generally speaking, stone with uniform fine structure has a delicate texture, which is a good product for stone; stone with coarse grain and unequal grain structure has poor appearance. In addition, due to the influence of geological action, the stone often produces some fine cracks in it, and the stone is most likely to break along these parts, so it should be removed carefully. As for the lack of edges and corners, it affects the appearance even more, so you should pay special attention to it when choosing.

  The second measure is to measure the size and specification of the stone, so as not to affect the splicing, or cause the patterns, patterns and lines after splicing to be deformed and affect the decorative effect.

  The third listening is to listen to the knocking sound of the stone.

  The knocking sound of good-quality stone is crisp and pleasant; on the contrary, if there are slight cracks inside the stone or the contact between particles becomes loose due to weathering, the knocking sound will be rough and hoarse.

  Four tests, that is, use simple test methods to check the quality of the stone. Usually drop a small amount of ink on the back of the stone. If the ink disperses and leaches out quickly, it means that the internal particles of the stone are loose or there are gaps, and the quality of the stone is not good;